Dr. SHIJOH V.

Dr Shijoh V

Associate Professor
  • Ph.D (2017) -- NIT Calicut
  • ME (2009) -- Instrumentation Engineering(MIT Campus, Anna University)
  • B. Tech (2003) -- Electrical and Electronics Engineeering(GEC Thrissur, Calicut University)
  • Assistant Professor in EEE dept. Jyothi Engineering College -- from 02-06-2016 to till date.
  • Adhoc faculty in Electrical Engineering Department of NIT Calicut from 06-01-2015 to 11-06-2015, from 27-07-2015 to 17-12-2015 and from 21-12-2015 to 23-05-2016.  
  • Lecturer in Vimal Jyothi Engineering College, Chemperi, Kannur, Kerala (2005-2010). Joined Vimal Jyothi Engineering College on 5-sep-2005 as lecturer in EEE department, later on the completion of ME in Instrumentation Engineering, Shifted to AEI Department of the same institute and relieved from the institute on 23-12-2010 for pursuing PhD at NIT Calicut.
Areas of Specialization

Instrumentation Engineering

Areas of Interest

  • Hybrid Dynamic Systems
  • Process Modeling and Control
  • Instrumentation and Control systems
  • Artificial Neural Network
  • State and Parameter Estimation of Process
  • Electrical Machines
  • Electrical Circuits and Networks

Sno. Achievement Year
1

Grants fetched

Travel grant of Rs. 81815/- from SERB-DST for attending conference at Paris

2013

Conference:

  1. Sherin K. P., Reshma Raj C., Shijoh V., " Interleaved ZVS Voltage Fed DC-DC Converter with Capacitive Filter for High Altitude Wind Energy Applications", In proc. of ICICICT, Kannur, India,6-7 July 2017.
  2. Shijoh V., T. Jarin, Varghese M. V., M. V. Vaidyan, "Direct control of autonomous hybrid systems with inverse dynamics controller and ANN estimator-A critical comparison with MPC based system", In proc. of ICETET, Kanyakumari, India, 9-10 December 2016.
  3. Aiswarya Raj, V. Shijoh and T. Jarin, "Sustentation of Energy by a Contemporary Gsm Based Prepaid Energy Meter", In proc. of ICETET, Kanyakumari, India, 9-10 December 2016.
  4. Akhil A. Balakrishnan, V. Shijoh and T. Jarin, "Phase Shift Controlled Full Bridge DC-DC Converter with less Circulating Loss", In proc. of ICETET, Kanyakumari, India, 9-10 December 2016.
  5. Anupama B., Shijoh V., “LQR based tuning of PID controller for magnetic levitation system and its performance comparison with conventional method”, In proc. of ncoretech, LBS College of Engineering, Kerala, 10-11 February 2016
  6. Shijoh V., M. V. Vaidyan, “Estimator Based Controllers for Hybrid Systems with Uncertainties – An Experimental Validation”, In proc. of ICACCI, SCMS Aluva, Eranakulam, India, 10 – 13 August, 2015, pp. 1044 – 1051, available at IEEE explorer
  7. Shebeera C. A., Shijoh V., M. V. Vaidyan, “Nonlinear Modelling and Fuzzy Control of Quadruple Tank Process”, national conference on energy and environment management, NSS college of Engineering, Palakkad, India, 7-9 February, 2014.  
  8. Vaidyan, V. M.; Shijoh V.; Sasikumaran, S., "Energy saving scheme for steel rolling mills in steel manufacturing system with H∞ stabilization in parameter uncertainties," IEEE Conference on Systems, Process & Control (ICSPC), pp. 164–168, 13–15 Dec. 2013, available at IEEE explorer.
  9. Shijoh V., M. V. Vaidyan, Varghese M. V. “Computer Aided Implementation of Estimator Based Inverse Dynamics Controller for the Control of Non-measurable State Variables of an Autonomous Hybrid System”, In proc. of int. conference ICSCA, Paris, France, 1-2 June 2013.
  10. Shijoh V., M. V. Vaidyan , “Development of Generic Dynamic Nonlinear Model for Autonomous Hybrid System and Design of Inverse Dynamics Controller and Derivative Free State Estimator in Presence of Uncertainties”, In proc. of imac4s IEEE international conference, Palai, Kerala 22-23 March 2013. available at IEEE explorer.
  11. S. Kumar, V. Shijoh, G. Devi, “A Complete Analysis of the Performance of Extended Kalman Filter for the State Estimation of Three Phase Induction Motor on a Simulated Machine Model”, In proc. of national conf., iFEST-2009, VJEC, Kannur, Kerala, 2nd April, 2009.

Journal:

  1. Aiswarya Raj, V. Shijoh and T. Jarin, "Sustentation of Energy by a Contemporary Gsm Based Prepaid Energy Meter", Middle-East Journal of Scientific Research, vol. 25, no. 1, pp. 34-39, 2017.
  2. Akhil A. Balakrishnan, V. Shijoh and T. Jarin, "Phase Shift Controlled Full Bridge DC-DC Converter with less Circulating Loss", Middle-East Journal of Scientific Research, vol. 25, no. 1, pp. 65-73, 2017.
  3. K.P. Sherin, V. Shijoh and T. Jarin, "Renewable Power Centred Intelligent Power Supervision System for Households",  Middle-East Journal of Scientific Research, vol. 25, no. 1, pp. 49-55, 2017.
  4. Shijoh V., M. V. Vaidyan, “Experimental Investigations on Performance Comparison of EKF and ANN based Controllers with UKF Based Controller for Hybrid Systems with Uncertainties”, Korean Journal of Electrical Engineering & Technology (SCI), vol. 11, no. 5, pp.1492-1502 , 2016.
  5. Anupama B., Shijoh V., “LQR based tuning of PID controller for magnetic levitation system and its performance comparison with conventional method”, International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, vol. 3, issue 1, February 2016, pp. 119-123
  6. Shijoh V., M. V. Vaidyan, “ANN Approach for State Estimation of Hybrid Systems and Its Experimental Validation”, Mathematical Problems in Engineering (SCI), Hindawi volume 2015 ID 382324, 13 pages.
  7. Shijoh V., M. V. Vaidyan, Varghese M. V. “Computer Aided Implementation of Estimator Based Inverse Dynamics Controller for the Control of Non-measurable State Variables of an Autonomous Hybrid System”, Lecture Notes on Software Engineering, Volume 1, No 3, August 2013, pp .284-288
  8. Shijoh V., M. V. Vaidyan , “Development of Nonlinear Model and Performance Evaluation of Model based Controller and Estimator for the Efficient Control of Three-Tank Hybrid System”, International Journal of Computer Applications, October, 2012, Volume 56, Issue 12, pp. 17 – 29.

International Conference:

  1. TIMA 2009 International Conference at MIT Chennai, 4-6 January 2009
  2. IMAC4S-2013 IEEE international conference, Palai, Kerala, 22-23 March 2013.
  3. ICSCA-2013 IACSIT international conference, Paris, France 1-2 June 2013.
  4. ICSPC-2013 IEEE conference, Kuala Lumpur, Malaysia, 13-15 December 2013.
  5. ICACCI-2015 IEEE conference, SCMS, Aluva, India, 10-13 August 2015.
  6. ICETET2k16 International Conference, Kanyakumari, India, 9-10 December 2016.

National Conference:

  1. iFEST-2009, Vimal Jyothi Engineering College, Kannur, Kerala, 2nd April, 2009

Short Term Courses

  1. Short Term Training Proggramme on Research Methodology, JECC, Thrissur, 11/01/2017-15/01/2017
  2. School on Systems and Control, NIT Calicut, 08/08/2015 – 09/08/2015
  3. Pedagogical aspects of Engineering Education, NIT Calicut, 08/08/2015 – 09/08/2015
  4. Training programme on LabVIEW, VJEC Kannur, 22/02/10
  5. FDTP on Process Control, MIT Chennai, 30/11/09 – 6/12/09
  6. NI Yantra- annual embedded system design programme, Chennai Trade Centre
  7. Work Shop on Matlab and MiPower, VJEC Kannur, 27/07/2009
  8. Pre-conference tutorial on Advanced Process Control, MIT Chennai, 04/01/09