DR. GIBIN GEORGE

Dr Gibin George

Assistant Professor

Obtained Ph.D, from Dept of Metallurgical and Materials Engineering, NIT Karnataka, Mangalore For Dissertation titled “Influence of polymeric binders on the physico-chemical properties of... Read More

National Institute of Technology, Karnataka, India (2011-2015)

Ph.D, Metallurgical and Materials Engineering.

Dissertation: Influence of polymeric binders on the physico-chemical properties of sol-gel electrospun nickel oxide and cobalt oxide nanofibers.

National Institute of Technology Calicut, Kerala, India (2009-2011)

Master of Technology, Nanotechnology, 

Dissertation: Study of erosion effect of nanofluid on ductile and brittle materials.

K.C.G. college of Engineering and Technology, Tamilnadu, India (2005-2009)

Bachelor of Engineering, Mechanical Engineering,

Dissertation: Streamlining the build process of gearbox in Adour-MK871 turbofan engine.

TEACHING EXPERIENCE

o   Teaching assistance in Engineering drawing and Machine drawing, National Institute of Technology, Calicut, India, 2009.

o   Teaching assistance in Nanoscience and Technology lab, School of Nanoscience and Technology, National Institute of Technology, Calicut, India, 2010.

o   Teaching assistance in Polymer and ceramic laboratory, National Institute of Technology Karnataka, Surathkal, Mangalore, Karnataka, India. July 2011- July 2015.

o   Assistant professor, Department of Mechanical Engineering, AXIS college of Engineering, Thrissur, Kerala, India. July 2015-February 2016.

o   Assistant professor, Department of Mechanical Engineering, Jyothi Engineering college, Thrissur, Kerala, India. March 2016-present.

 

Areas of Specialization

Nanotechnology, Material Science

Areas of Interest

Ceramic nanomaterials, Electrospinning, Material Science, Polymer nanocomposites, carbon nanomaterials, sensors, catalysis

Sno. Achievement Year
1

K C G Varghese Endowment

2006
2

GATE Scholarship

2009
3

MHRD Research fellowship and grant 2011-2015

2011

PEER-REVIEWED PUBLICATIONS

o   S. Anandhan, K. Ponprapakaran, T. Senthil and Gibin George, “Parametric Study of Manufacturing Ultrafine Polybenzimidazole Fibers by Electrospinning”, International Journal of Plastics Technology, 16, 101 (2012).

o   T. Senthil, Gibin George and S. Anandhan, “Chemical-resistant Ultrafine Poly(styrene-co- acrylonitrile) Fibers by Electrospinning: Process Optimization by Design of Experiment”, Polymer-Plastics Technology and Engineering, 52, 407 (2013).

o   Gibin George and S. Anandhan, “Structural characterization of nano-crystalline Co3O4 ultra-fine fibers obtained by sol-gel electrospinning”, Journal of Sol-gel Science and Technology, 67, 256 (2013).

o   Gibin George, R. K. Sabareesh, S. Thomas, V. Sajith, T. Hanas, S. Das and C. B. Sobhan, “Experimental Investigation of Material Surface Erosion Caused by TiO2 Nanofluid Impingement”, Journal of Nanofluids, 3(2), 97 (2014).

o   Gibin George, A. Mahendran and S. Anandhan, “Use of Nano-ATH as a Multi-functional Additive for Poly(ethylene-co-vinyl acetate-co-carbon monoxide)”, Polymer Bulletin, 71, 2081 (2014).

o   B. Shivamurthy, Gibin George, K. U. Bhat and S. Anandhan, “Influence of nano-aluminum hydroxide on tribological, mechanical and flammability properties of E-glass fabric/epoxy multi-layered laminates”, Kautschuk Gummi Kunststoffe, 67, 22 (2014).

o   Gibin George and S. Anandhan, “Glass Fiber Supported NiO Nanofiber Webs for Reduction of CO and Hydrocarbon Emissions from Diesel Engine Exhaust”, Journal of Materials Research, 29, 2451 (2014).

o   Gibin George and S. Anandhan, “Synthesis and characterization of nickel oxide nanofiber webs with alcohol sensing characteristics”, RSC Advances, 4, 62009 (2014).

o   Gibin George and S. Anandhan, “Electrospun Nickel Oxide Nanofibre Webs for Thermistor Applications”, International Journal of Plastics Technology, (2014). DOI: 10.1007/s12588-014-9097-5.

o   Gibin George and S. Anandhan, “Comparison of Structural, Spectral and Magnetic Properties of NiO Nanofibers Obtained by Sol-Gel Electrospinning from Two Different Polymeric Binders”, Materials Science in Semiconductor Processing, 32, 40 (2015).

o   Gibin George, A. Mahendran and S. Anandhan, “Structure−Property Relationship of Halloysite Nanotubes/Ethylene−Vinyl Acetate−Carbon Monoxide Terpolymer Nanocomposites”, Journal of Thermoplastic Composite Materials, 0892705715588802, (2015). Doi: 10.1177/08927057 15588802.

o   Gibin George, Liju Elias, A. C. Hegde and S. Anandhan, “Morphological and structural characterization of sol-gel electrospun Co3O4 nanofibers and their electro-catalytic behavior”, RSC Advances, 5, 40940 (2015).

o   Gibin George and S.  Anandhan, “A Comparative Study on the Physico-chemical Properties of Sol-Gel Electrospun Cobalt Oxide Nanofibers from Two Different Polymeric Binders”, RSC Advances, 5, 81429 (2015).

o   Gibin George and S. Anandhan, “Tuning Characteristics of Co3O4 Nanofiber Mats Developed for Electrochemical Sensing of Glucose and H2O2”, Thin solid films, 610, 48-57 (2016).

o   Gibin George and S. Anandhan, “Photocatalytic Activity of Sol-Gel Electrospun Co3O4 Nanofibers in Degrading Methylene Blue and Methyl Orange”, Annals of Materials Science and Engineering; 2(2), 1025, (2015).

o   M. Selvakumar, P. Srivastava, H. S. Pawar, N. Francis, B. Das, G. Sathishkumar, B. Subramanian, S. Jaganathan, Gibin George, S. Anandhan, S. Dhara, G. Nando and S. Chattopadhyay, "On-Demand Guided Bone Regeneration with Microbial Protection of Ornamented SPU Scaffold with Bismuth-doped Single Crystalline Hydroxyapatite: Augmentation and Cartilage Formation", ACS Applied Materials and Interfaces, DOI: 10.1021/acsami.5b11723.

o    S.  Anandhan,  T.  Senthil,  Gibin George  and  Abhimanyu,  “Sol-Gel  Electrospinning  of Diverse Ceramic Nanofibers for Potential Applications: A Review”, (in pipeline).

o   Gibin George, A.M. Shanmugharaj and S.  Anandhan, “Structure−Property Relationship of Ethylene−Vinyl Acetate−Carbon Monoxide Terpolymer/MWCNT Nanocomposites”, (in pipeline).

o   Manoj Kumar Narayanan, Gibin George, S. Anandhan, H. D. Shashikala, Mechanical and structural properties of (50-X)BaO-X(YF2)-50P2O5 (Y - Ca, Ba) glasses, Journal of Physics and Chemistry of Solids (submitted).

PATENT

o   Gibin George, T. Hanas, K. Sabareesh, S. Das, S. Thomas, V. Sajith and C. B. Sobhan, “A system for determining material surface erosion caused by impingement of nanofluids on pipes carrying nanofluids”. Indian Patent File no: 181/KOL/2011 dated 11.2.2011(TATA Steel & NIT Calicut) (filed).

BOOK CHAPTERS

o   T. Senthil, Gibin George and S. Anandhan, 'Electrospinning of Polymers: Fundamentals and Applications', in 'Advances in Polymer Materials and Technology', S. Anandhan and S. Bandyopadhyay, Eds., CRC Press, Boca Raton, USA (in press).

o   Gibin George, B. Sachin Kumar and S. Anandhan, 'Polymer nanocomposites for food packaging applications', in 'Advances in Polymer Materials and Technology', S. Anandhan and S. Bandyopadhyay, Eds., CRC Press, Boca Raton, USA (in press).

CONFERENCE PRESENTATIONS

o   Gibin George, K. Ponprapakaran, T. Senthil and S. Anandhan, “Fabrication of Ultrafine Polybenzimidazole  Nanofibers  by  Electrospinning  for  High  Temperature  Applications”. Third International conference on Natural Polymers, Bio-polymers, Bio-Materials, their Composites, Blends, IPNs, Polyelectrolytes and Gels: Macro to Nano Scales (ICNP 2012)”, India, October 2012.

o   Gibin George and S. Anandhan, ‘Cobalt Oxide Nanofibers through Electrospinning’, International Conference on Rubber and Rubber like Materials (ICRRM – 2013), India, March 2013.

o   Gibin George and S. Anandhan, 'Electrospun Nickel Oxide Nanofiber Webs for Thermistor Applications', International Conference on 'Advancements in Polymeric Materials APM-2014', CIPET-Bhubaneswar, India, February 2014.

o   Gibin George and S. Anandhan, 'Removal of Pollutants from Engine Exhaust Gas by Supported Nickel Oxide Nanofibrous webs Produced by Sol-gel Electrospinning', International Conference on Polymers and Allied Materials ICPAM-2014, IIT Patna, India, May 2014.

o   Gibin George, A. Mahendran and S. Anandhan, 'Quantification on Dispersion of Halloysite Nanotubes in Poly(ethylene-co-vinyl Acetate-co-carbon Monoxide)/Halloysite Nanocomposite and its Correlation on Properties of the Composites', IRMRA 22nd Rubber Conference, India Habitat Center, New Delhi, India, November 2014.

o   Gibin George and S. Anandhan, 'Influence of Polymeric Binders on Structural, Spectral and Magnetic Properties of NiO Nanofibres Obtained by Sol-Gel Electrospinning', International Conference on 'Advancements in Polymeric Materials APM-2015', CIPET-Chennai and IISc, Bangalore, India, February 2015 (Invited paper).

o    Gibin George and S. Anandhan, '', International Conference on Recent Advances in Electrical Engineering – ICRAEE ‘16, Jyothi Engineering College Cheruthuruthy, India, April 2016.

POSTER PRESENTATIONS

o   Gibin George, K. Sabareesh R, S. Das, T. Hanas and C. B. Sobhan, “Erosion phenomena of nanofluids on ductile and brittle materials” Cochin Nano 2011, India, August 2011.

o   Gibin George, K. Ponprapakaran, T. Senthil and S. Anandhan, “Fabrication of Ultrafine Polybenzimidazole  Nanofibers  by  Electrospinning  for  High  Temperature  Applications”. Third International conference on “Natural Polymers, Bio-polymers, Bio-Materials, their Composites, Blends, IPNs, Polyelectrolytes and Gels: Macro to Nano Scales (ICNP 2012)”, India, October 2012.

o   Gibin George and S. Anandhan, ' Electrospun NiO Nanofiber Webs for the Reduction of CO and Hydrocarbon Emissions from Diesel Engine Exhaust', International Conference on 'Advancements in Polymeric Materials APM-2015', CIPET-Chennai and IISc, Bangalore, India, February 2015.

OTHER PROFESSIONAL ACTIVITIES

o   Attended workshop on “Recent Trends in Design and Precision Engineering”, National Institute of Technology Karnataka and Central Manufacturing Technology Institute, India, 2013.

o   Attended workshop on “Applications of Statistical and Soft Computing Techniques in Engineering Research”, Canara Engineering College, Mangalore, India, 2013.

o   Attended First Indo–US International conference on “Polymers for packaging applications (ICPPA 2012)”, India, April 2012.

o   Attended training at National Thermal Power Corporation, Kayamkulam, Kerala, India 2008.

o   Hold a diploma in Catia, Ansys and Pro-E modeling softwares, 2007-2008.

o   Reviewer for Journal of Materials Science: Materials in Electronics

o   Attended FDP on Performance based work ethic at Jyothi Engineering College, Cheruthuruthy, June 2016.

o   Attended faculty development program on Life Skills organized at Muthoot Institute of Technology and Science, Ernakulam by ICT Academy and KTU, July 2016.